Home >>

Hard Disk Recovery

 

 

It is estimated that over 90% of all new information produced in the world is being stored on magnetic media, most of it on hard disk drives. Hard Disk Data recovery ( Or Hard Drive Data Recovery ) is the process of salvaging data from damaged, failed, corrupted or inaccessible hard disk drive. This can be due to physical damage to the hard disk or logical damage to the file system that prevents it from being mounted by the host operating system. Although there is some confusion as to the term, data recovery can also be the process of retrieving and securing deleted information from a storage media for forensic purposes.

Expertise on data recovery, data backup services , Canaan is the most trusted service provider in the U.S.A., our technicians and engineers are a highly skilled team of trained and experienced, we use the best Art-of-The Sate equipments to fulfill your data archive/backup/recovery project. We provide FREE diagnose service to our clients, no recovered data, no charge!

When data failure occurs, the first thing to remember is not to be frustrated, do NOT take any further recovery actions by yourself. At Canaan Data Recovery Service Group. we fully understand the importance of your data. We don't boast a claim of 100% successful recovery ratio, but we do have an excellent data recovery record, we'll use our experience to provide you with fast and reliable service in order to get your data back into stable working status.

Physical damage

A wide variety of failures can cause physical damage to storage media. Hard disks can suffer any of several mechanical failures, such as head crashes and failed motors. Physical damage always causes at least some data loss, and in many cases the logical structures of the file system are damaged as well. This causes logical damage that must be dealt with before any files can be salvaged from the failed media.

Most physical damage cannot be repaired by end users. For example, opening a hard disk in a normal environment can allow dust to settle on the surface, causing further damage to the platters and complicating the recovery process. Furthermore, end users generally do not have the hardware or technical expertise required to make these repairs; therefore, costly data recovery companies are consulted to salvage the data. These firms often use Class 100 cleanroom facilities to protect the media while repairs are being made. The extracted raw image can be used to reconstruct usable data after any logical damage has been repaired. Once that is complete, the files may be in usable form although recovery is often incomplete. On the other hand, there are many accounts of users getting a bad disk going long enough to pull their data off, often via slightly bizarre tricks. These include making the drive cold (in the freezer) or spinning it manually on the ground, both actions being used unstick a jammed platter.

Examples of physical recovery procedures are: removing a damaged PCB (printed circuit board) and replacing it with a matching PCB from a healthy drive (this often entails the movement of a microchip from the original board to the replacement), changing the original damaged read/write head assembly with matching parts from a healthy drive, removing the hard disk platters from the original damaged drive and installing them into a healthy drive, and often a combination of all of these procedures. All of the above described procedures are highly technical in nature and should never be attempted by an untrained individual. All of these procedures will almost certainly void the manufacturer's warranty.

Logical damage

Far more common than physical damage is logical damage to a file system. Logical damage is primarily caused by power outages that prevent file system structures from being completely written to the storage medium, but problems with hardware (especially RAID controllers) and drivers, as well as system crashes, can have the same effect. The result is that the file system is left in an inconsistent state. This can cause a variety of problems, such as strange behavior (e.g., infinitely recursing directories, drives reporting negative amounts of free space), system crashes, or an actual loss of data.

Two main techniques are used by these repair programs. The first, consistency checking, involves scanning the logical structure of the disk and checking to make sure that it is consistent with its specification.

The second technique for file system repair is to assume very little about the state of the file system to be analyzed, and using any hints that any undamaged file system structures might provide, rebuild the file system from scratch. This strategy involves scanning the entire drive and making note of all file system structures and possible file boundaries, then trying to match what was located to the specifications of a working file system.

While most logical damage can be either repaired or worked around using these two techniques, data recovery software can never guarantee that no data loss will occur. For instance, in the FAT file system, when two files claim to share the same allocation unit ("cross-linked"), data loss for one of the files is essentially guaranteed.

Some kinds of logical damage can be mistakenly attributed to physical damage. For instance, when a hard drive's read/write head begins to click, most end-users will associate this with internal physical damage. This is not always the case, however. Often, either the firmware on the platters or the controller card will instead need to be rebuilt. Once the firmware on either of these two devices is restored, the drive will be back in shape and the data accessible.

Data Recorvery | Hard Disk Recovery | Data Tape Recovery | Diskette Recovery | Memory Recovery | Laptop Recovery
Copyright © 2009 Canaan Data Service Group at South-dakota
home | driving direction | submit your case | about us
live help
customer service technical supportLive Chat